Welding Safety: Here’s What You Should Know

November 13, 2019 8:07 pm Published by Leave your thoughts

Welding is an incredible artform and method of construction. It requires specific knowledge of techniques, tools and materials. It also requires the use of certain safety measures. Whether you are completing a stick welding course in Phoenix, AZ or are pursuing a new hobby, it’s important to follow appropriate welding safety measures.

As you pursue this craft, use this safety guide to protect yourself during arc welding training in Phoenix, AZ and other welding practices. For more tips on welding methods and safety, contact your local welding experts.

Follow the hierarchy

The National Institute for Occupational Safety and Health provides a Hierarchy of Hazard Controls. Following the guidelines established by this hierarchy will put you on a solid path to welding safety. The hierarchy includes five levels:

  1. Elimination: The most effective way to control a hazard is to remove it. Of course, you probably don’t want to eliminate welding from your life. However, you can apply this principle by eliminating welding in areas where it is not safe.
  2. Substitution: For this step, welders can replace a hazardous element of welding with something that is less dangerous. For example, you can replace a metal with something that is not as toxic.
  3. Engineering controls: Use these controls to protect those around the welding area from any hazards involved. A good example of engineering controls is ventilation. You should always use local ventilation when completing a stick welding course in Phoenix, AZ or any other type of training or welding practice.
  4. Administrative controls: These methods alter the way welding is completed. They can include changes to procedures to make the process safer, additional training to improve abilities and reduce risk or the application of warning signs and labels to increase awareness.
  5. Personal protective equipment: This method of hazard control is lowest on the hierarchy because it is the least effective method of controlling welding hazards. After everything else is put in place, this is a final protective measure to prevent harm. Examples of personal protective equipment (PPE) include flame-resistant clothing, welding gloves and respirators.

More tips

As you adhere to the guidelines in the hazard control hierarchy, you should use the following additional safety tips for welding:

  • Inspection: Before you begin welding, inspect the area. Look for potential hazards, check all equipment for proper operation and take any steps necessary to prep the area for safe welding.
  • Fire extinguishers: Never weld without a fire extinguisher nearby. This equipment should be ready for use at all times during a stick welding course in Phoenix, AZ.
  • Boundaries: Before welding, move all combustibles at least 35 feet away from the area, or properly shield them.

Get more tips

For more safety guides during arc welding training in Phoenix, AZ or other welding pursuits, contact the team at Vern Lewis Welding Supply, Inc. We offer a complete range of products and services, including welding gases, equipment, supplies, safety products and more. We also provide training specific to any machine you purchase from us, free of charge. Contact us today to discover how we can serve all your welding needs.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *